含氮生物降解促进剂对土壤吸附正十六烷的影响

选用正十六烷模拟润滑油,通过振荡平衡实验,考察了两种含氮脂肪酸型生物降解促进剂（甲基二乙醇胺油酸酯（MDEAO）和油酸二乙醇酰胺（ODEA））对水土体系中正十六烷吸附行为的影响。实验结果表明：正十六烷在水土体系中的有机质标化分配系数与土壤种类无关,与生物降解促进剂种类有关;土壤对正十六烷的吸附过程更符合Freundlich等温吸附模型;MDEAO的临界胶束浓度为2.0 mg/L,对土壤吸附正十六烷有一定的促进作用,ODEA的临界胶束浓度为0.7 mg/L,形成的胶束对正十六烷的增溶效果明显,促进了正十六烷在土壤中的解吸。     

2002—2012年京津唐PM10变化规律及差异

对2002年6月—2012年5月京津唐城市群大气可吸入颗粒物(PM10)质量浓度的长期监测数据进行分析,结合3市的地理、气候气象条件,分析了京津唐城市群大气颗粒物质量浓度的变化特征;根据3市PM10相互之间的发散系数,定量分析了3市PM10变化的差异。结果表明,2002—2012年北京市的PM10质量浓度变化范围为0.012~0.600 mg/m3,天津、唐山2市的PM10质量浓度变化范围分别为0.014~0.600、0.019~0.452 mg/m3。2008、2011年天津市PM10质量浓度年平均值达到二级标准,唐山市从2008年后PM10质量浓度年平均值达到二级标准;北京市PM10质量浓度总体变化趋势为春季秋季冬季夏季,天津、唐山市均为冬季春季秋季夏季,但不同年份的变化趋势略不同;北京-唐山、北京-天津、天津-唐山之间PM10的月度发散系数范围分别为0.402 7~0.159 2、0.406 8~0.142 9、0.323 1~0.107 8,说明空间距离最近的天津-唐山之间大气污染的相互影响较北京-天津、北京-唐山之间大。     

基于ACF-AMDF的气井环空液面回波特征提取方法

为了精确有效地提取声波法检测气井环空液位的回波周期，在分析环空中测试波的传播特征及基音周期检测的基础上，提出1种基于检测信号短时自相关函数(ACF)及平均幅度差函数(AMDF)的液面回波周期提取方法；利用自主搭建的室内模拟实验系统开展了不同初始环空压力下环空液位检测实验；对检测信号进行中心削波处理并计算ACF/AMDF，提取出液面回波周期并与理论计算值对比分析；同时分析了现场环空液位检测信号，提取其回波周期。研究结果表明:提出的新方法能有效地用于提取环空液面回波周期；室内实验中，该方法最大误差绝对值为1.54%；该方法能够有效抑制液面回波信号中的随机噪声及接箍反射波等，处理后的信号曲线在回波周期处峰值更加突出、集中，而在其他位置更加平滑，提高了对液面回波周期特征的辨识能力。     

供水管网震后流量监测点的动态分级优化布局研究

为了提高管网地震监测点布局的准确性和合理性，基于管网微观水力计算模型和动态分级法，提出供水管网震后流量监测点的动态分级优化布局模型。首先，利用管网微观水力计算模型计算管段流量的影响系数，构建管段的影响系数矩阵，并利用信息熵确定管段权重；其次，标准化处理影响系数矩阵，通过聚类迭代提出供水管网地震流量监测点优化布局的动态分级方法，对供水管网震后流量监测点进行优化布置分级评定；最后，根据工程实例进行方法实践，结果表明:供水管网中的管线分类较为科学合理，地震监测点在供水管网上分布也比较均匀，而且该模型在一定程度上消除了人为因素的影响，保障了震时管网的监控效果和日常建设的合理性。     

不同类型压力对飞行员安全绩效的影响规律研究

为探究各类型压力对飞行员安全绩效的影响规律，为飞行员日常工作管理提供依据，选取某航空公司200名飞行员进行压力测试，并调取其近6 a的飞机品质(QAR)数据，通过相关性分析和线性回归分析将飞行员压力数据与其QAR数据进行对比分析，探究飞行员压力对飞行安全绩效的影响规律。研究结果表明:工作负荷压力、家庭压力、人际关系压力和组织管理压力会显著负向影响飞行员安全绩效；角色压力和专业发展压力会显著正向影响飞行员安全绩效。     

基于超效率DEA模型的三峡库区生态效率评价及空间演化格局分析

本文基于2010—2017年的统计数据,首先采用超效率DEA模型对三峡库区26个区县的生态效率进行测算,然后运用空间自相关分析方法对三峡库区生态效率的演化格局进行了实证分析,探索三峡库区生态效率的时空动态演变特征。研究表明:2010—2017年三峡库区生态效率平均水平处于0.5601～1.1920,整体呈现波动性变化趋势,生态效率在一定程度上有所改善,但是整体水平仍然较低;从区域层面看,各个区县间生态效率水平不平衡,空间分布上呈现"西高东低"的非均衡性特征。局部空间自相关分析表明,三峡库区2010—2017年集聚性呈逐渐减弱态势,空间异质性逐渐增加,整体的生态效率差异变大。最后依据实证研究分析结果,本文对如何提升三峡库区生态效率提出了相应的政策建议。     

近距煤层无煤柱协调开采布局研究与应用*

为了解决老母矿近距煤层的开采难题,通过理论分析并利用FLAC 3D数值模拟软件进行模拟,分析出煤层前后推进150 m是最合理的步距，侧向采动支撑压力在15~50 m内存在影响。基于这些理论数据，确定回采巷道的合理位置,进而确定以内错距离范围为30~60 m的内错式布置方式布置巷道和无煤柱协调开采布局，并进行井下工程应用。最后把无煤柱协调开采布局与双巷掘进开采布局对比，得出无煤柱协调开采布局的先进性和优势，研究结果可为同类条件下的工程应用提供借鉴。     

Numerical simulation of small-scale pool fires of LNG

Liquefied natural gas (LNG) has been largely indicated as a promising alternative solution for the transportation and storage of natural gas. In the case of accidental release on the ground, a pool fire scenario may occur. Despite the relevance of this accident, due to its likelihood and potential to trigger domino effects, accurate analyses addressing the characterization of pool fires of LNG are still missing.In this work, the fire dynamic simulator (FDS) has been adopted for the evaluation of the effects of the released amount of fuel and its composition (methane, ethane, and propane), on the thermal and chemical properties of small-scale LNG pool fire. More specifically, the heat release rate, the burning rate, the flame height, and thermal radiation, at different initial conditions, have been evaluated for pool having diameter smaller than 10 m. Safety distances have been calculated for all the investigated conditions, as well.Results have also been compared with data and correlations retrieved from the current literature. The equation of Thomas seems to work properly for the definition of the height over diameter ratio of the LNG pool fire for all the mixture and the investigated diameters.The addition of ethane and propane significantly affects the obtained results, especially in terms of radiative thermal radiation peaks, thus indicating the inadequacy of the commonly adopted assumption of pure methane as single, surrogate species for the LNG mixture.     

One-step estimation method and nomogram to predict safety distances of pressurized gas pipelines from blast sources

Pressurized gas pipelines may be endangered by accidental or intentional activities causing excess ground vibrations leading to failure. Thus, many papers have been published on this issue, yet most of these efforts suffer from complexity and inability to ascertain that all engaged factors are taken into account. These factors are attributed, namely, to explosion source, explosion-ground interaction, energy transfer through the ground, ground-pipeline interaction, and response of the pipeline. The deterministic method developed previously by the author has derived useful prediction mathematical formulas that can be used to calculate, either the stand-off distance of purposefully used explosives, or the maximum quantity of explosives to be used at a given distance, or the equivalent stress of a pipeline induced by an explosive charge at a given standoff distance. The method can also be applied to accidental blast events in factories or other activities. Yet, the complex formulas developed are hard to be used in the field and a simpler approach is needed to facilitate and accelerate in-field estimations. Thus, a nomogram was prepared to make the safety estimations easy and fast and taking into account all engaged critical factors starting from the explosion source through the integrity of the structure.     

Insight into the safety distance of ground and underground installations in typical petrochemical plants

Petrochemical plants are continuously turning into large-size corporations, the installations of facilities show a developing trend from ground to underground because of the difference in land using rate. In this regard, the safety distance of petrochemical equipment buried in both ground and underground cases were investigated based on risk assessment. As a case study, gasoline tank and LPG tank set on the ground and underground are singled out to compare the risks involved. The research showed that the setting case of installation had a great influence on safety distance. Two cases have 80% reduction of equivalent safety distance compared with the rest of the cases. It was found that when the gasoline storage tank was placed underground alone, the PLL value decreased by 36.7%. Only LPG tank was placed underground, and the PLL decreased by 6.33%, and the gasoline and LPG storage tanks were placed underground simultaneously, the PLL value declined by 42.3%. Thus, the layout of plants could be further optimized, which can greatly improve the performances of land use efficiency and safety. In addition, this paper, the selection of embedding methods and the sensitivity of underground case to overpressure was resumed from two aspects: soil properties and burial depth. For the soil properties, it was found that the water saturated sandy soil with high air content and the low density unsaturated sandy soil had better effects on weakening overpressure. Such properties are particularly beneficial to reducing the occurrence rate of accidents. In terms of burial depth, it can be observed that as the burial depth was changed from 0.5m to 1.1m, the value of overpressure has dropped dramatically. When the burial depth was 2m, the damage to personnel and buildings has been greatly reduced beyond 2m from the explosion center.